mildew1951 Posted September 14, 2007 #1 Share Posted September 14, 2007 :confused: This is what power outlets look like in Australia. http://www.pco.com.au/axaa2008/plug.jpg and 220v. Will these work on RCCL ships or do I need an adaptor. Sailing on Rhapsody in 1 week. Link to comment Share on other sites More sharing options...
Albert Ross Posted September 14, 2007 #2 Share Posted September 14, 2007 Albert to the rescue [again!]. No, this sort of plug will not work on the ships - the plugs on board are either 110 or 220v - so you will need a US or a European adaptor. Link to comment Share on other sites More sharing options...
Jeano222 Posted September 14, 2007 #3 Share Posted September 14, 2007 When I clicked on the link it didn't work. In the past we have used a power strip but due to most of the plugs being bulky, we would plug something in and the next plug was covered up. We bought a Power Squid so that all 5 plugs can be used. I ordered online and it was only 12.49. Link to comment Share on other sites More sharing options...
uksimonusa Posted September 14, 2007 #4 Share Posted September 14, 2007 :confused: This is what power outlets look like in Australia. http://www.pco.com.au/axaa2008/plug.jpg and 220v. Will these work on RCCL ships or do I need an adaptor. Sailing on Rhapsody in 1 week. You will need an adapter for European to Australia plugs, you said in another thread that Australia is 220v, so if you want to use the US style you will need an adapter and a voltage converter. Link to comment Share on other sites More sharing options...
Quampapetet Posted September 15, 2007 #5 Share Posted September 15, 2007 You need an adapter; US plugs are different. We do typically have three prongs (though some things still only have two, no grounding prong on the bottom), but the top two are parallel to each other (perpendicular to the floor) and the bottom one (the grounding prong) is round instead of flat. Here's a photo I found via Google of what our outlets as well as both two- and three-pronged plugs look like: Link to comment Share on other sites More sharing options...
mildew1951 Posted September 15, 2007 Author #6 Share Posted September 15, 2007 Thanks for that. I think I have an adaptor for your plugs at least the two upright prongs anyway. Cheers Link to comment Share on other sites More sharing options...
Starbright Posted September 15, 2007 #7 Share Posted September 15, 2007 I don't think you'll need a voltage converter. This is only necessary if you're using a 110v appliance in a 220v socket. The other way round is safe without converting the voltage, although 220v items won't work as efficiently if plugged into a 110v socket. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.