CappNJack Posted August 11, 2017 #1 Share Posted August 11, 2017 I understand that the Dream has cut the current cruise short skipping the last port of call due to engine trouble. She is heading back to New Orleans. Does anyone have any other info? Link to comment Share on other sites More sharing options...
fkfad Posted August 11, 2017 #2 Share Posted August 11, 2017 Oh no!!!!! Let's hope it gets fixed quickly (we're sailing on her in September)! So sorry for those passengers who lost a couple of days of their vacations!!! That would make me very sad!!! Link to comment Share on other sites More sharing options...
lotoarmy Posted August 11, 2017 #3 Share Posted August 11, 2017 Yep! True. Onboard. Limping back to New Orleans at 15 mph. Leaves us with only two stops for the week. Only giving us $50 refunds each.;) Link to comment Share on other sites More sharing options...
evandbob Posted August 11, 2017 #4 Share Posted August 11, 2017 That's only 13 knots, YIKES! Link to comment Share on other sites More sharing options...
mcfam5 Posted August 11, 2017 #5 Share Posted August 11, 2017 (edited) Onboard as well....we are guessing the problem began last night about 8-9:00 pm. You could feel a bit of a "jump" to the ship but we were in calm waters. Definitely traveling very slow - barely breaking the water as we go along. If we continue traveling at the current speed (just under 25 km/hr), we will be lucky to make it back to New Orleans for our original arrival time on Sunday. Sent from my iPhone using Forums Edited August 11, 2017 by mcfam5 Link to comment Share on other sites More sharing options...
darth frosty Posted August 11, 2017 #6 Share Posted August 11, 2017 Link to comment Share on other sites More sharing options...
mcfam5 Posted August 11, 2017 #7 Share Posted August 11, 2017 (edited) While we are skipping the port of call, I wouldn't anticipate the cruise being cut short - we truly are not traveling fast enough to get there "early". We will be lucky if we make it on time! LOL. I haven't really seen unhappy people (except for the normal line up of people looking to complain and get something for free!) - just a busy Lido deck! Sent from my iPhone using Forums Edited August 11, 2017 by mcfam5 Link to comment Share on other sites More sharing options...
winddawn Posted August 11, 2017 #8 Share Posted August 11, 2017 I wonder what will happen for the next cruise? Link to comment Share on other sites More sharing options...
BoDidly Posted August 11, 2017 #9 Share Posted August 11, 2017 Dang another busted ship :( Link to comment Share on other sites More sharing options...
Casedx2110 Posted August 11, 2017 #10 Share Posted August 11, 2017 I wonder what will happen for the next cruise? I am wondering that to since I am suppose to be on it. Havent heard anything from Carnival. Link to comment Share on other sites More sharing options...
BoDidly Posted August 11, 2017 #11 Share Posted August 11, 2017 I am wondering that to since I am suppose to be on it. Havent heard anything from Carnival. Keep us updated if you will . Link to comment Share on other sites More sharing options...
wms99 Posted August 11, 2017 #12 Share Posted August 11, 2017 I wonder what will happen for the next cruise? From an engineering point of view, they most likely already know the problem, have the faulty engine broken down, and parts on the way to NOLA. Then they can go thru normal turn around, and start fixing the ship, loading, and head back down the river slowly until fixed. Worst case, they drop one or two the 3 stops next week. Link to comment Share on other sites More sharing options...
NightOne Posted August 11, 2017 #13 Share Posted August 11, 2017 A little disappointing to hear being that Dream just got out of its last dry dock in February 2017. Yes, I know things happen but still sad to hear. Link to comment Share on other sites More sharing options...
topspin1267 Posted August 11, 2017 #14 Share Posted August 11, 2017 From an engineering point of view, they most likely already know the problem, have the faulty engine broken down, and parts on the way to NOLA. Then they can go thru normal turn around, and start fixing the ship, loading, and head back down the river slowly until fixed. Worst case, they drop one or two the 3 stops next week. Hope youre right. We leave on the 27th Link to comment Share on other sites More sharing options...
martinchem Posted August 11, 2017 #15 Share Posted August 11, 2017 Good luck. Link to comment Share on other sites More sharing options...
mcfam5 Posted August 11, 2017 #16 Share Posted August 11, 2017 Just an update....we have been stopped for about the last two hours. The captain made an announcement around 2:15 pm saying we would be stopping for the technical team to work on the issue. Sent from my iPhone using Forums Link to comment Share on other sites More sharing options...
chengkp75 Posted August 11, 2017 #17 Share Posted August 11, 2017 From an engineering point of view, they most likely already know the problem, have the faulty engine broken down, and parts on the way to NOLA. Then they can go thru normal turn around, and start fixing the ship, loading, and head back down the river slowly until fixed. Worst case, they drop one or two the 3 stops next week. Well, this really depends on whether this is a problem with an "engine" or with the propulsion. If someone onboard can confirm whether there are two wakes or just one, will help clarify the situation. I don't think the possible loss of one "engine" (a diesel generator set) out of 6 would result in a reduction in speed to 12-13 knots. Even losing two diesels would allow about 15-17 knots. I suspect a problem with the propulsion, having one propeller completely out of service. This could mean a failure of the pitch control system, the propulsion electric motor itself, or the power supply and control to the motor (a variable frequency drive). Depending on what part of the propulsion system is involved, and what has failed, will determine whether or not the parts are available (many of these components are not "stocked" by the manufacturer, but built to order), and whether the repair will be accomplished quickly or not. Each propulsion motor has two sets of windings, and two control systems, so its possible for them to get half of the system running, and have one propeller at full power and one at half power until they can fix it completely. That would also give about 17-18 knots. Link to comment Share on other sites More sharing options...
chengkp75 Posted August 11, 2017 #18 Share Posted August 11, 2017 Just an update....we have been stopped for about the last two hours. The captain made an announcement around 2:15 pm saying we would be stopping for the technical team to work on the issue. Sent from my iPhone using Forums This reinforces my suspicion that it is a propulsion problem, not an engine problem. The inoperative propeller would be allowed to "freewheel" in the wake of the ship to reduce drag, and if they are stopping, that means they need to stop that shaft from freewheeling so they can work on it. You can't work on rotating equipment. Link to comment Share on other sites More sharing options...
BoDidly Posted August 11, 2017 #19 Share Posted August 11, 2017 Well, this really depends on whether this is a problem with an "engine" or with the propulsion. If someone onboard can confirm whether there are two wakes or just one, will help clarify the situation. I don't think the possible loss of one "engine" (a diesel generator set) out of 6 would result in a reduction in speed to 12-13 knots. Even losing two diesels would allow about 15-17 knots. I suspect a problem with the propulsion, having one propeller completely out of service. This could mean a failure of the pitch control system, the propulsion electric motor itself, or the power supply and control to the motor (a variable frequency drive). Depending on what part of the propulsion system is involved, and what has failed, will determine whether or not the parts are available (many of these components are not "stocked" by the manufacturer, but built to order), and whether the repair will be accomplished quickly or not. Each propulsion motor has two sets of windings, and two control systems, so its possible for them to get half of the system running, and have one propeller at full power and one at half power until they can fix it completely. That would also give about 17-18 knots. By chance ,are you Italian ? Link to comment Share on other sites More sharing options...
Corinne Marie Posted August 11, 2017 #20 Share Posted August 11, 2017 Call Sig and edgar Hanson of the Norwegian and they will know how to fix the dream. Link to comment Share on other sites More sharing options...
Micahs Grandad Posted August 11, 2017 #21 Share Posted August 11, 2017 Last year Dream had problem and they had to wait about 6 months for drydock to fix it. It caused them to shorten port visits due to slower speeds Link to comment Share on other sites More sharing options...
chengkp75 Posted August 11, 2017 #22 Share Posted August 11, 2017 By chance ,are you Italian ? Huh? Link to comment Share on other sites More sharing options...
winddawn Posted August 11, 2017 #23 Share Posted August 11, 2017 I am wondering that to since I am suppose to be on it. Havent heard anything from Carnival. Praying for best for you and crossing fingers! I know I sure wouldn't want my impending cruise to be impacted, so I'm hoping for the best for you too! :) Link to comment Share on other sites More sharing options...
cruiserNC Posted August 11, 2017 #24 Share Posted August 11, 2017 On the Dream right now going 19.90 knots. We should make NOLA on time easy Sent from my iPhone using Forums Link to comment Share on other sites More sharing options...
Casedx2110 Posted August 11, 2017 #25 Share Posted August 11, 2017 on the dream right now going 19.90 knots. We should make nola on time easy sent from my iphone using forums :d:d:d:d Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now