Rare ontheweb Posted July 27, 2018 #1 Share Posted July 27, 2018 We sailed on the Maasdam last week in an inside cabin. I brought a clock from home so when I would wake up I could get the time (instead of wearing a watch to bed and going to the bathroom to turn on a light). There were two outlets side by side; one was 220 volts for the hairdryer and the other said 115 volt. The clock constantly ran fast with 115 volts, so it became useless. It was not the clock since it worked fine in our hotel room in Montreal and now at home in our bedroom, so it must have been the extra voltage. Link to comment Share on other sites More sharing options...
frankc98376 Posted July 27, 2018 #2 Share Posted July 27, 2018 Actually, standard voltages in US are now 120 volt and 240 volt Link to comment Share on other sites More sharing options...
hastinc Posted July 27, 2018 #3 Share Posted July 27, 2018 Electrically powered bedside clocks use the electricity frequency (usually 50Hz or 60Hz) to keep time. A small difference in voltage does not matter. Power distribution companies make sure the correct frequency is generated so the clock at home will keep accurate time. On board a ship this does not normally happen, hence the known issue of electric clocks not keeping the correct time. Link to comment Share on other sites More sharing options...
Fouremco Posted July 27, 2018 #4 Share Posted July 27, 2018 Electric travel clocks are notoriously unreliable for use on cruises. Battery powered travel clocks, smart phones, tablets and watch alarms are some of the better options. Whatever your choice, keeping track of your ship's time changes is a must. Link to comment Share on other sites More sharing options...
Krazy Kruizers Posted July 27, 2018 #5 Share Posted July 27, 2018 We always take 2 battery powered travel alarm clocks -- 1 for each side of the bed. And they also register the temperature in the cabin. Link to comment Share on other sites More sharing options...
Rare Gail & Marty sailing away Posted July 27, 2018 #6 Share Posted July 27, 2018 Sharp makes a electric clock with 2 USB ports that will work on ships. Sent from my SM-G930T using Forums mobile app Link to comment Share on other sites More sharing options...
Rare ontheweb Posted July 27, 2018 Author #7 Share Posted July 27, 2018 Actually the clock would have also worked on batteries, but we did not realize using it as a plug in on the ship would be a problem. You do always learn something new on these boards. Link to comment Share on other sites More sharing options...
Fouremco Posted July 27, 2018 #8 Share Posted July 27, 2018 Actually the clock would have also worked on batteries, but we did not realize using it as a plug in on the ship would be a problem. You do always learn something new on these boards. So true! Link to comment Share on other sites More sharing options...
Haboob Posted July 27, 2018 #9 Share Posted July 27, 2018 We sailed on the Maasdam last week in an inside cabin. I brought a clock from home so when I would wake up I could get the time (instead of wearing a watch to bed and going to the bathroom to turn on a light). There were two outlets side by side; one was 220 volts for the hairdryer and the other said 115 volt. The clock constantly ran fast with 115 volts, so it became useless. It was not the clock since it worked fine in our hotel room in Montreal and now at home in our bedroom, so it must have been the extra voltage. Plug-in clocks take their timekeeping from frequency, not voltage, and ships don't bother to run one set of generators at 60.0000 cycles per second for the "115v" plugs, and another whole set of generators at 50.0000 cycles per second for the "220v" plugs. Just one set of generators with whatever frequency might be convenient and transformers changing one voltage to the other. No telling what the actual frequency was on your voyage, but it was higher than your clock was built for. Link to comment Share on other sites More sharing options...
sail7seas Posted July 28, 2018 #10 Share Posted July 28, 2018 (edited) Batteries are the solution to this problem. ( as mentioned) Edited July 28, 2018 by sail7seas Link to comment Share on other sites More sharing options...
HUNKY Posted July 29, 2018 #11 Share Posted July 29, 2018 Isn't the time shown on the bedside phone? Link to comment Share on other sites More sharing options...
Rare ontheweb Posted July 29, 2018 Author #12 Share Posted July 29, 2018 Isn't the time shown on the bedside phone? Yes, it was, but it is very tiny. And if you need glasses, it is basically impossible to read without them. Plus that does not help the person on the other side of the bed. Link to comment Share on other sites More sharing options...
The Other Tom Posted July 29, 2018 #13 Share Posted July 29, 2018 Plug-in clocks take their timekeeping from frequency, not voltage, and ships don't bother to runone set of generators at 60.0000 cycles per second for the "115v" plugs, and another whole set of generators at 50.0000 cycles per second for the "220v" plugs. Just one set of generators with whatever frequency might be convenient and transformers changing one voltage to the other. (Note that 60,000 cycles per second = 60Hz). No telling what the actual frequency was on your voyage, but it was higher than your clock was built for. Correct. And I would add that in the US "110V" outlets can vary between 110V up to 120V, but all are 60Hz. Link to comment Share on other sites More sharing options...
baggal Posted July 29, 2018 #14 Share Posted July 29, 2018 Electric travel clocks are notoriously unreliable for use on cruises. Battery powered travel clocks, smart phones, tablets and watch alarms are some of the better options. Whatever your choice, keeping track of your ship's time changes is a must.[/quote Be careful using your smartphone for the correct time. We recently traveled westbound through the Straits of Gibraltar. We set our phone alarms for an early wake-up call for the next port, Cadiz, since we had an excursion to Seville. Unfortunately, the phones picked up the signal from Morocco where the time was an hour later than the time in Spain. We were quite startled when the room service waiter knocked at the door but glad that he did! Link to comment Share on other sites More sharing options...
Fouremco Posted July 29, 2018 #15 Share Posted July 29, 2018 Electric travel clocks are notoriously unreliable for use on cruises. Battery powered travel clocks, smart phones, tablets and watch alarms are some of the better options. Whatever your choice, keeping track of your ship's time changes is a must.[/quote Be careful using your smartphone for the correct time. We recently traveled westbound through the Straits of Gibraltar. We set our phone alarms for an early wake-up call for the next port, Cadiz, since we had an excursion to Seville. Unfortunately, the phones picked up the signal from Morocco where the time was an hour later than the time in Spain. We were quite startled when the room service waiter knocked at the door but glad that he did! I can't speak for other makes, but iPhones allow you to have the time set automatically based on the local signal, which you experienced, or to set it manually. When cruising through multiple time zones, I always use the manual setting. Link to comment Share on other sites More sharing options...
iancal Posted July 29, 2018 #16 Share Posted July 29, 2018 We use our watches or our ipad. Failing all that, the time is listed on the television. We also do wake up calls. Link to comment Share on other sites More sharing options...
TAD2005 Posted July 29, 2018 #17 Share Posted July 29, 2018 In the US, the power companies strive to maintain an official voltage of 120 and 240. It can vary based on loading. But most electronic devices made in the past 20 years will happily operate anywhere from 100 to 240 volts. They all rectify those voltages to DC and produce anywhere from 5 to 18 volts for the device. Some electrical items are voltage specific, like light bulbs and appliances. The power line frequency (60 hz in North America) is very important due to electric clocks and anything with a motor in it. Your 33-1/3 RPM vinyl records (remember those ??) would sound strange if the powerline frequency was not exactly 60 HZ. But, ships attempt to maintain 60 hz, but it is not critical because they do not interconnect with other power companies. So, your electric clock on the ship may run a little slow or fast. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now